APOLO   50 / 60 / 75 / 100

GENERAL FEATURES

 

Apolo  is  a  diamond  wire  machine  that completes the line of Poeiras diamond wire machines. It has an especially  robust  construction  in  order  to  sustain  engines  up  to 100 HP.  It  can  be equipped with an aluminium wheel with a 800 mm or 1000 mm diameter that is attached directly to the main engine.

It  has  a  hydraulic  power  station  that  allows  the  cutting  head to be located at 360º as well as its axial movement  at 400  mm, therefore making it possible to perform two vertical cuts at a maximum distance of 2,10 m and one horizontal cut without moving the machine from its place.

The machine  advances  ove r two rails with  a  centra l rack, driven by an electric engine that is controlled through an electrically programmed board, in this way reaching the most efficient cutting.

The  G model´s  main engine has a speed inverter that allows adapting the speed of the diamond wire to the type of a stone to be cut.

 

 

Follow Us