PÉGASO 50 / 60 / 75
GENERAL FEATURES
Pégaso is a unique diamond wire machine that represents a new concept within its category. It has an oleo dynamic power station with a command that allows to position the wheel at 360° as well as its lateral
movement at 400 mm, therefore making it possible to perform two vertical cuts at a maximum distance of 2,10 m and one horizontal cut without moving the machine from its place.
The machine advances over two rails with a central rack, driven by a motor that is controlled through an electrically programmed board, allowing the main motor to reach the highest possible efficiency. The machine has an 800 mm diameter aluminium whee l directly attached to the main motor, in this way reducing power loss to the minimum and assuring a continuous linear speed of 41 m/s.
The electric switchboard is located inside the machine and is completely sealed. The machine can be equipped with a tubular or coupling rail, essential in quarries with an inclination above 5%.
In the models for cutting granite and schist the linear speed of the wheel is programmed and controlled by an electronic inverter, enabling a speed between 0 and 41 m/s without any power loss.
Standard model: 50, 60 and 75 HP.


VIDEO